Proceedings of the Asian Thermal Spray Conference, Volume IX

ISSN: 2630-5208 (Online Version)

Editor in Chief: Khor Khiam Aik
Editors: Ooi Chui PingYu Ligen

Publisher: Institute of Materials (East Asia)

 

Table of Content

 

Proceedings of the 9th Asian Thermal Spray Conference Cover

 

Preface to the 9th Asian Thermal Spray Conference (ATSC-2018)

 

 9th ATSC Organizing Committee

 

ASTC-1

Manufacturing, Microstructure and Room • High Temperature Mechanical Properties of Particle (TiC, TiB2)-Reinforced 316L Stainless Steel Composites Developed by Selective Laser Melting

Kee-Ahn Lee, Young-Kyun Kim, Min-Seok Baek, and Bandar AlMangoura

ASTC-2

Tailoring Microstructures of Thermal/Environmental Barrier Coatings by Plasma Spray-Physical Vapor Deposition (PS-PVD)

Jia Shi, Liangliang Wei, Baopeng Zhang, Qian Guo, Hongbo Guo

ASTC-1001

CMAS Resistance of a Novel Micro-Nano Structured TBC Produced by Plasma Spray-Physical Vapor Deposition

W. He, B. Zhang, W. Song, and H. Guo

ASTC-1002

A Dense Y3Al5O12 Layer with Excellent CMAS Resistance Prepared by Plasma Spray-Physical Vapor Deposition on YSZ Thermal Barrier Coatings

J. He, S. Sun, J. Shi, and H. Guo

ASTC-1003

Silver-Doped Hydroxyapatite Coatings Deposited from Suspensions via Plasma Spraying

J. Cizek, V. Brozek, T. Chraska, F. Lukac, J. Medricky, R. Musalek, T. Tesar

ASTC-1004

Microstructure and Mechanical Properties of Cold Sprayed Inconel 625 Coatings

Wen Sun, Adrian Wei Yee Tan, Ayan Bhowmik, Iulian Marinescu, Erjia Liu

ASTC-1005

Effect of Zinc Oxide Nanoparticles on ZnZnO Sputtering Targets Prepared by Cold Spray Process

M. Kadkhodaee, A. Abdollah-zadeh, H. Assadi, R.A. Seraj, H. Hajipour

ASTC-1006

Cold Spray Deposition of Blended and Granulated Stellite 21/WCp Composite Powders

R.A. Seraj, A. Abdollah-zadeh, S. Dosta, H. Assadi, I.G. Cano

ASTC-1007

Microstructure Controllability of Ceramic Coatings: Effect of Materials and Deposition Temperature

Chang-Jiu Li, Qi-Lan Zhang, Yin-Qiu Sun, Shu-Wei Yao, Shan-Lin Zhang, Cheng-Xin Li, Guan-Jun Yang

ASTC-1008

Residual Stress in WC-Co Coatings

V. Luzin, A.S.M. Ang and C. C. Berndt

ASTC-1009

Investigation of Mechanical Properties of Magneto-mechanical Powder Coated on AISI 304 Stainless Steel Substrate

H. Pakkirappa1, K. Mahesha, Mallikarjun Mantoor

ASTC-1010

Effect of Post-treatment on the Microstructure, High Temperature Deformation and Oxidation Properties of Inconel 718 Alloy Manufactured with Selective Laser Melting

Y. J. Kang, S. S. Yanga and K. A. Lee

ASTC-1011

Plasma Sprayed Ni-Al-Mo Coatings as Electrocatalyst Electrode for Alkaline Water Electrolysis

E.A. Owusu, H.J. Park, S.W. Kang, K.H. Baik

ASTC-1012

MoSi2-YSZ Thermal Barrier Coating on Mo-based High Temperature Alloys

S.W. Kang, H.J. Park, K.H. Baik

ASTC-1013

Multi-Scaled Intra/Inter-Splat Pore Structure Tuning for Plasma Spraying

Guan-Jun Yang, Lin Chen, Guang-Rong Li, Cheng-Xin Li, Chang-Jiu Li

ASTC-1014

Comparative Study of HVOF Cr3C2-NiCr Coatings from Different Feedstock Powders

S.Y. Kang, H.J. Park, K.H. Baik

ASTC-1015

Novel Sintering Mechanism of Plasma-Sprayed TBCs from Free-Standing to Constrained States

Guang-Rong Li, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li

ASTC-1016

Study of Microstructure and Mechanical Properties of Cold Sprayed Copper Coatings on Different Substrates

Wenhua Ma,  Kejie Zhang, Weixia He, Caihua Wang, Yingchun Xie, Xiagao Zhu, Renzhong Huang

ASTC-1017

Analysis of Cold Spray Coating Formed with Stationary Nozzle

K. Loke, P. K. Koh, H. W. Ng, P. Cheang, J. Guo, Z. Zhang, N. Sridhar

ASTC-1018

Analysis of Cold Spray coating Sprayed at Angles

Loke Zhi Cheng Kelvin, Guo Junyan, Zhang Zhi Qian, Sridhar Narayanaswamy, Koh Pak Keng, Lim Teik Cheng Alan, Cheang Hong Ning Philip, Kwok Wai Onn Richard

ASTC-1019

Effect of Silicon Oxide on the Properties of YSZ Coatings

X.J.Ji, Y.G.Yu, Y.J.Li, X.L.Lu and F.Jia

ASTC-1020

Effect of Low-Melting Oxide on Properties of YSZ Coatings

Y.G.Yu, X.J.Ji, Y.J.Li, X.L.Lu and F.Jia

ASTC-1021

Experimental Investigation of LHR Engine to Mitigation of Oxide of Nitrogen

Senthil.R, Elangovan.M, Balamurgan.R, Parnesh. G., Sudagar.S

ASTC-1022

Performance and Evaluation of LHR Diesel Engine with Neem Biodiesel

Senthil.R, Elangovan.M, Sudagar.S, Parnesh. G., Balamurgan.R,

ASTC-1023

Cored-Wire Arc Spray Fabrication of Novel Aluminum Nano-Copper Coatings for Anti-Corrosion Fouling Hybrid Performances

Lijia Fang, Jing Huang, Yi Liu, Botao Zhang, Hua Li

ASTC-1024

Investigation of Microstructure and Corrosion Resistance of Arc Sprayed Al-PE Composite Coatings

X. X. Wang, J. Huang, Y. F. Gong, X. K. Suo and H. Li

ASTC-1025

Nanostructured Hydroxyapatite Coatings Deposited by In-Situ Shot Peening Assisted Cold Spraying for Biomedical Applications

Y. Liu, W. Hou and H. Li

ASTC-1026

New Hardware to Get HVOF-Grade High Quality Ceramic Coatings

Satish Tailor, Ankur Modi, S. C. Modi

ATSC-1028

Cold Spray Trials of Different Metal Powders on Cast Iron

F. Xue, W. Sun, A.W.Y, Tan, A. Bhowmik, J.y. Lek, I. Marinescu, F. Li

ATSC-1029

Deposition of Photo-Catalytic TiO2 Film by New Designed of Ultrasonic Atomization Plasma Spray using Ar Working and Carrier Gas

Hsain Sagr Hadi A, Yasutaka Ando

ATSC-1030

Deposition of Titanium Oxide Film by Low Power APS Equipment Using Titanium Hydroxide Feedstock Powder

Y. Ando, H. Sagr Hadi A and Y. Noda

ATSC-1031

Characterization of the Vacuum Plasma Sprayed HfC Coating Using Non-Contact 3D Scanning Technique

H. S. Kim, B. R. Kang and S. M. Choi

ATSC-1032

Hafnium Carbide Coatings Fabricated by Vacuum Plasma Spraying

Bo Ram Kang, Ho Seok Kim and Seong Man Choi

ATSC-1033

Influence of Particle Microstructure on Mechanical and Plasma Resistance Properties of Y2O3 Coating Deposited by Vacuum Kinetic Spray

Hansol Kwon, Yeonju Kim and Changhee Lee

ATSC-1034

Investigation of Arc Thermal Sprayed Aluminium Coatings Mechanical Properties Using Instrumented Identation Continuous Stiffness Method

Wai Yeong Huen, Jitendra Kumar Singh, Vanissorn Vimonsatit, Han-Seung Lee

ATSC-1035

Rapid Deposition of Porous Photo-Catalytic TiO2 Film for DSSC by 1kW Class Atmospheric Plasma Spray Equipment using Ar/N2 Working Gas

K. Alabi, Z. Abidine, Y. Ando and Y. Noda

ATSC-1036

Aluminium Gas Film Deposit by Low Power APS Equipment Using Air Working Gas

Ettayebi Zine Elabidine, Yoshimasa Noda, Yasutaka Ando

ATSC-1037

Heat Transfer from Plasma Jet to Droplets in Plasma Spray-Physical Vapor Deposition

Meijun Liu, Guan-Jun Yang, Guang-Rong Li, Cheng-Xin Li, Chang-Jiu Li

ATSC-1038

Simultaneous Increase of Friction Coefficient and Wear Resistance Through WC-(nano WC-Co)

P. H. Gao1, B.Y. Chen1, H. Jia, W. Wang, J. P. Li, Z. Yang, Y. C. Guo and L. L. Hao

ATSC-1039

Remelting and Solidification of Aluminum Alloys for Piston through Tungsten Argon Arc

Z. Yang, P. H. Gao, W. Wang1, Y. C. Guo, and J. P. Li

ATSC-1040

Determination of Thermal Conductivity at Elevated Temperature of Thermal Barrier Coatings

S.Takahashi, M. Akoshima, T. Tanaka, M. Ogawa, N. Oikawa

ATSC-1041

Numerical and Experimental Investigation of Residual Stress in Thermal Barrier Coatings during APS Process

Jianguo Zhu

ATSC-1042

Hydrophobicityof Ceria Coating Prepared by Air Plasma Spraying

Lingyue Hu, Xiaofeng Zhao and Ping Xiao

ATSC-1043

Highly Oxidation and Spallation Resistant MCrAlY Bond Coat Fabricated via Powder Milling Approach

Jie Lu, Xiaofeng Zhao, and Ping Xiao

ATSC-1044

Thermal Stability of EB-PVD Thermal Barrier Coatings with Bond Coat Species in Cyclic Thermal Exposure

Zhu Lu, Bonggu Kim, Yeon-Gil Jung

ATSC-1045

Microstructural Evaluation and Mechanical Property of LZ-YSZ Blended Composition for TBC Application

Guanlin Lyu, Dowon Song, Zhe Lu, Yeon-Gil Jung

ATSC-1046

The Characteristics of Cold Sprayed Cu Coatings by Feedstock Treatment

K. H. Ko, B. Ahn, J. S. Park, H. Lee

ATSC-1047

Undercooling Effect in Solidification Modeling of Single SplatFormed by Impact of a Hollow Droplet on a Flat Substrate

Digvijay Singh, Arvind Kumar

ATSC-1048

Fabrication of Bare Onion-Like Carbon Coating and TiOOnion-Like Carbon Binary Coating for Pollutants Removal

Yaoyao Fu, Yi Liu, Hua Li

ATSC-1049

A Review on The Wear Resistant Coatings Deposited Using Thermal Spray

R.T. Li, J.H. Mao, Y. Wanga

ATSC-1050

Experimental and Numerical Investigation on Voltage-Current Characteristics of a Few kW Cascade Plasma Torch with External Magnetic Field

H. Saito, H. Matsumoto, K. Maeshima and T. Fujino

ATSC-1051

Effect of Aluminium Oxide and Carbon Nanotube on Hot Corrosion Behavior of Plasma Sprayed Thermal Barrier Coating

J.G.Thakare, R.S.Mulik, M.M.Mahapatra, Chandan Pandey

ATSC-1052

New Advances in SST Cold Spray Technology and Applications

Julio Villafuerte

ATSC-1053

Cold Spray Coating Diagram

M. Kamaraj, B. Alwin, B. Aviral, and S.R. Bakshi

ATSC-1054

Spray Pattern of Copper Coatings with the Optimized Rectangular Cross-Section Nozzle by the Computational Fluid Dynamics (CFD) in High-pressure Cold Spraying

K. Sakaki and S. Arai

ATSC-1055

Effect of Niobium on Twinning In Laser Deposited Ternary Ti-Al Alloy

M. Tlotleng and S. Pityana

ATSC-1056

Deposition of Ti2AlC MAX Phase Coating by Kerosene-Fuelled High Velocity Oxy-Fuel (HVOF) Spray

Jisheng Pan, Zheng Zhang, Doreen Mei Ying Lai, Suo Hon Lim

ATSC-1057

Deposition Machanism Analysis of cold Sprayed Metalic Pratice on Ceramic Substrate

Shohei Nakamura, Yuji Ichikawa, Kazuhiro Ogawa

ATSC-1058

Microstructure of Cold Sprayed Coating Using TiO2 Powder Synthesized by Simple Hydrolysis Method

A. R. Toibah, K. Takahashi, M.  Yamada and M. Fukumoto

ATSC-1059

The Factors Influencing Solid Solubility in Metallic Bond Coats of the Thermal Barrier Coating Systems (TBCS)

A.M. Pashayev, A.S. Samedov, T.B. Usubaliyev, P.Sh. Abdullayev, E.A. Abdullayev

ATSC-1061

Alleviation of Phase Decomposition during Plasma Spray of Ti2AlC MAX Powders through Process Parameter Optimization

Zheng Zhang, Jisheng Pan, Doreen Mei Ying Lai, Suo Hon Lim

ATSC-1062

Yellow TiO2 Coatings Deposited by Cold Spray

M.  Yamada, K. Fukudome and M. Fukumoto

ATSC-1063

Fabrication and Microstructural Characterization of SUS316-Al2O3 Functionally Graded Beams Prepared Using Plasma Thermal Spray Process

Pravin Malik, Ravikiran Kadoli

ATSC-1064

Improving the Corrosion Resistance of Magnesium Alloys by Cold Spraying of Aluminum Alloys

M. Yasira. S. Siddique, S.Wilayat H.S, Q. Jamal, L. C. Xin

ATSC-1065

Relationship Between Particle Shape and Adhesion Strength of Cold Spray Metallic Coatings

Yuji Ichikawa, Ryotaro Tokoro, And Kazuhiro Ogawa

ATSC-1066

Microstruture and Properties of Arc Sprayed NiCrMaAl Coating After Heat Treatment and Flame Remelting

P.Daram, P.R. Munroe, C. Banjongprasert

ATSC-1067

Preparation of the Glassy Thermal Spray Film for Torque Sensor

K. Amiya and M. Komaki

ATSC-1068

Plasma Sprayed Yittria Stabilized Hafnia Coating Better Substitute to Conventional YSZ Coating

Abhishek Pathak, Aminul Islam, Krishna Kant Pandey, Pavan Bijalwan, Monojit Dutta, Anup Kumar Keshri

ATSC-1069

Electrical Properties of Dense Al2O3 Coatings Prepared by SPS Process

Toshihiko Tosaki, Hiroyuki Ibe, Takaya Masuda, Kazuto Sato, Nobuaki Kato

ATSC-1070

Effect of Feedstock Particle Size on Al2O3 Phases of Plasma Sprayed

Balmukund Dhakar, Satyajit Chatterjee and Kazi Sabiruddin

ATSC-1071

-25NiCr and NiCrMoNb Coatings on Alloy 80A at 900°C2C3Hot Corrosion Studies of High-Velocity Oxy-Fuel Sprayed Cr

V Sreenivasulu, M Manikandan

ATSC-1072

Plasma Spraying of Fine Ceramic Powder

Masato Suzuki

ATSC-1073

Development of a Portable Thermal Spray System for On-Site Coating Deposition

P K Aw, X Zeng

ATSC-1075

Utilization of Reactive Plasma Nitriding for Depositing High Quality AlN Coatings

M. Shahien, M. Yamada and M. Fukumoto

ATSC-1076

Composition Optimization and Properties of Gd2O3 Doped La2Ce2O7 Thermal Barrier Coatings

Lihua Gao, Fang Jia, Xiaojuan Ji, Deming Zhang

ATSC-1077

Preparation and Performance of a Novel Composite Structure Seal Coating

X. Y. Cheng, Y. G. Yu, D. M. Zhang, T. Liu, J. M. Liu, J. Shen

ATSC-1078

Modeling of Suspension Plasma Spraying for Thermal Barrier Coating of Power Generation Turbine Blades

Y. S. Han, G. S. An, Y. S. Oh and H. T. Kim

ATSC-1079

Improvement of EBPVD Process for Thermal Barrier Coating of Turbine Blades using Finite Element Method
Y. S. Han, J. M. Chae, H. L. Ryu, and Y. S. Oh

ATSC-1080

Atmospheric or Suspension Plasma-Sprayed Hydroxyapatide Coating for Biomedical Application
Mirazul Mahmud Abir, Sarita Morakul, Yuichi Otsuka

ATSC-1081

Ceramic Coatings Prepared by Combustion Synthesis and Thermal Spray3O2-Y2-ZrO3O2Solidification Mechanism and Microstructure Evolution of Al

Xiaoyue Su, Yongting Zheng, Yongdong Yu, and Wanjun Yu

ATSC-1082

Numerical Simulation of Gas Mixtures in DC Plasma Torch
Hunkwan Park, Yeon Woo Yoo, Eungsun Byon, Sunghun Lee, and Anthony Murphy

ATSC-1083

Controlling of Surface Temperature in Flame Thermal Shock Testing

K. Yuan, Y. G. Yu, D. M. Zhang, W. A. Hou, J. M. Liu and X. J. Ji

ATSC-1084

How Al and Ta Diffusion in MCrAlX Response the Growth of TGO. Part III: Simulation

Kang Yuan, Yueguang Yu, Deming Zhang, Zhengqiu Li, Xiangzhou Gao, Jianming Liu

ATSC-1085

Flame Spray Coating on Horizontal Tubes for Enhancement of Falling Film Evaporation in Multi-Effect Distillation System
Raju Abraham and A. Mani

ATSC-1086

How Al and Ta Diffusion in MCrAlX Responses the Growth of TGO. Part II: Composition Effect

Z. Q. Li, K. Yuan, Y. G. Yu, X. Z. Gao, J. M. Liu, K. P. Du, and D. M. Zhang

ATSC-1087

How Al and Ta Diffusion in MCrAlX Responses the Growth of TGO. Part I: Temperature Effect

Xiangzhou Gao, Kang Yuan, Yueguang Yu, Zhengqiu Li, Jianming Liu, Kaiping Du, Deming Zhang

ATSC-1088

Effect of Sodium Phosphate Treatment on Morphology and Corrosion Characteristics Al Coating Deposited by Arc Thermal Spraying Process

Han-Seung Lee and Jitendra

ATSC-1090

Sliding Mode Control for Magnetic Levitation System: An Eigen Structure Assignment Approach
Bipin Krishna and Deepak Chandran